What is a clutch and how clutches work read »
What is a manual gearbox read »
What is a Dual Mass Fly-Wheel read »
Dual Mass vs. Single Mass Flywheel Systems read »
A clutch is a mechanical device which provides for the transmission of power (and therefore usually motion) from one component (the driving member) to another (the driven member). The opposite component of the clutch is the brake.
Clutches are used whenever the ability to limit the transmission of power or motion needs to be controlled either in amount or over time (e.g. electric screwdrivers limit how much torque is transmitted through use of a clutch; clutches control whether automobiles transmit engine power to the wheels).
In the simplest application clutches are employed in devices which have two rotating shafts. In these devices one shaft is typically attached to a motor or other power unit (the driving member) while the other shaft (the driven member) provides output power for work to be done. In a drill for instance, one shaft is driven by a motor and the other drives a drill chuck. The clutch connects the two shafts so that they may be locked together and spin at the same speed (engaged), locked together but spinning at different speeds (slipping), or unlocked and spinning at different speeds (disengaged).
Active Transmissions are AA Ireland Approved read »
Still..... the Feedback from our customers is good in December 2016 ......
2005 Toyota Corolla 1.4 D4D Gearbox .